Menu
Howto's
Products
Torque Specs
Dynos
Infopics
Part #'s
Links
Contact
About jmX
 Theme: 1 2 3
NEW: Meziere LS1 Electric Water Pump (C5 Version)
For years talk of electric water pumps had been circulating through the LS1 community, and finally Meziere has delivered. Whether you are a hard core drag racer who wants to just cool the car in the pits and staging lanes, an enthusiast who's itching for more power from his heads/cam car, or just a basic bolt on type of guy, an electric water pump is probably for you. (C5) More...
 Est 1-6hours
Meziere LS1 Electric Water Pump (F-Body Version)
For years talk of electric water pumps had been circulating through the LS1 community, and finally Meziere has delivered. Whether you are a hard core drag racer who wants to just cool the car in the pits and staging lanes, an enthusiast who's itching for more power from his heads/cam car, or just a basic bolt on type of guy, an electric water pump is probably for you. (F-Body) More...
 262347 viewsEst 1-6hours
C5 LGM Longtube Header Install
The headers are a full 32” True Long Tube header that has been dubbed, "The most powerful C5 header on the Planet”! This header includes a complete header with a 3/8” flange and incorporates a “Race Style Merge Collector”, to a full 3” X pipe, and continues in 3” right up to the original 2 bolt muffler flanges. This makes this a full bolt on application that requires NO cutting or welding, and leaves the factory system completely intact incase you ever want to easily put the car back to stock. (C5) More...
 332049 viewsEst 3-8hours
Did you know?
The heads between all the GenIII motors are interchangable. LQ4 (6.0L), LQ9 (6.0L), LS1 (5.7L), LS6 (5.7L), and LR4/LM4 (4.8/5.3L) heads are all interchangable. However, combustion chamber size, port volumes, and valve size does vary between these different head castings.
 
F-Body Cam and Valvespring Swap
By far, one of the best mods you can possibly ever do to your LS1/LS6 is to install an aftermarket camshaft in it. Here I go through the whole process of selecting and installing an aftermarket camshaft, along with the various valvetrain upgrades that are required. Frequently asked cam related questions are also answered. (F-Body) More...
 2221317 viewsEst 3-12 hours
C5 Heads/Cam Swap
Y-body installation instructions for installing your own Heads/cam package onto a C5 corvette. Optionally, instructions are included to swap the oil pump (Katech ported pump used), replace the timing chain (JWIS installed), and/or install an aftermarket crank pulley. Torque instructions included for both GM head bolts and ARP head bolts. (C5) More...
 823855 viewsEst 12-20 hours
Infopic: The LS1 "magnet trick"
If you are installing a camshaft into your LS1/LS6 and you aren't removing the heads, you can either take your chances and hope the lifter retainers hold the lifter up and keep it from falling, or you can buy 16 retractable pen magnets with the pocket clip on them. You bend out the pocket clip, reach in with the magnet until it grabs hold of the lifter, then you extend the pen magnet until you have JUST enough extension to let the pocket clip hold onto the head. You need to keep it under tension, loose pen magnets won't do you much good.

Click for full image
 
Front spring/shock swap
Here we ditch an old set of springs and stock shocks for a nice new setup. I used bilsteins and ground-control adjustible ride height springs. (F-Body) More...
 303192 viewsEst 3-4 hours
LS1 to LS6 PCV conversion
So many LS1's have oil consumption issues and GM took a stab at fixing it on the LS6. In this article I show you how to convert your LS1 over to the newer LS6 style PCV system. This will require cutting away a small part of your engine block, however, it sounds a lot scarier than it actually is. This mod can be done for about $65 in parts. (F-Body & C5) More...
 677417 viewsEst 2-6 hours
All content provided on this site is to be used as a suggestion only. Any damage to the vehicle or injury resulting from usage of these materials is 100% the users responsibility. Use of a professional mechanic is suggested if you do not feel comfortable with the instructions. Reproduction of any photography, work or otherwise herein is expressly prohibited without written permission from the publisher
2004 - jmX - All Rights Reserved.